500 Series is an IDEEI photovoltaic water-pump inverter covering 0.4–315kW across the catalog voltage branches. The page uses only the functions and electrical ranges printed in Product Catelog. Send the pump and PV nameplates so the exact order code, rated current and project options can be confirmed.
The 500 Series is designed for photovoltaic water-pump applications across 0.4–315kW. The approved catalog confirms the power and voltage branches below; exact SKU codes and current ratings remain selection-dependent.
The catalog describes a built-in efficient MPPT algorithm up to 99%.
Automatic start, stop and sleep functions are listed.
The series is positioned with a simple user interface.
Port water-level control is listed for pump-system automation.
The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.
| Catalog branch | Power range | Output phase | Voltage class | Order code |
|---|---|---|---|---|
| AC 1PH 220–240V | 0.4–7.5kW | Single phase | 220–240V | Confirm exact order model |
| AC 3PH 220–240V | 0.4–15kW | Three phase | 220–240V | Confirm exact order model |
| AC 3PH 380–440V | 0.4–315kW | Three phase | 380–440V | Confirm exact order model |
| Item | Verified specification |
|---|---|
| Catalog power branches | AC 1PH 220–240V: 0.4–7.5kW; AC 3PH 220–240V: 0.4–15kW; AC 3PH 380–440V: 0.4–315kW |
For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.
Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.
Yes. The 500 Series is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected 220–240V and 380–440V branches model.
Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.
Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.
The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.
Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.
Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.
Email: sales@ideeishop.com · WhatsApp: +86 183 5724 1165
IDEEI S319 Solar Pump Inverter 0.4–315kW MPPT AC/DC
S319 Series · 0.4–315kW · 220–240V
In StockRFQ
IDEEI S318 Solar Pump Inverter 0.4–500kW MPPT RS485
S318 Series · 0.4–500kW · 220–240V
In StockRFQ
IDEEI LF-100 Low-Voltage Solar Pump Controller 40–130V DC MPPT
LF-100 · 40V DC · 48V DC
In StockRFQ
Questions about model selection, bulk pricing or shipping? Chat with us directly.
Start WhatsApp Chat →Questions about model selection, bulk pricing or shipping? Chat with us directly.
Start WhatsApp Chat →
