FACTORY ONLINE — HAIYAN, ZHEJIANG
MON–SAT 8:30–17:30 (GMT+8) SALES@IDEEISHOP.COM WA +86 183 5724 1165
Get a Quote→ Contact
Home/Products/Solar Inverter/IDEEI ALLINONE 30kW Solar Inverter 220V + 380V
02 — SOLAR INVERTER

IDEEI ALLINONE 30kW Solar Inverter 220V + 380V

30kWALLINONE220V380VDC 850VMPPTPower ModePump Mode
In Stock Price on Request MOQ 1 UNIT

IDEEI ALLINONE 30kW solar inverter supports selectable 220V and 380V power or pump modes, 110-850V DC PV input and 220-400V AC input for mixed loads.

  • F0130kW ALLINONE integrated power class
  • F02110-850V DC photovoltaic input range
  • F03220-400V AC input range
  • F04Selectable 220V and 380V power or pump modes
  • F05Published output current: 60A at 380V class and 55A at 220V class
DOC DS-DESCSERIES SOLAR INVERTERREV 2026-A
IDEEI · Solar Energy Systems

IDEEI ALLINONE 30kW Solar Inverter 220V + 380V

The ALLINONE 30kW integrates photovoltaic conversion, AC-source input and selectable power or pump operation. Its documented wiring modes cover 220V and 380V output classes. The exact simultaneous-load arrangement must be confirmed from the required terminals, voltage class and connected equipment.

30kW220V / 380VDC 110-850VPower + pump modes

Key Features & Benefits

Integrated Dual-Mode Platform

One controller supports power-supply and water-pump operating modes with voltage-class selection.

Wide PV & AC Input

The supplied manual states photovoltaic input from 110V to 850V DC and AC input from 220V to 400V.

Load-Oriented Output

Power mode supplies compatible AC loads while pump mode provides variable-frequency motor control.

Protection & Display

LCD operation, overload protection and electrical fault protection support commissioning and monitoring.

Verified Model Selection

The table separates verified published data from project-dependent choices. Match the product by electrical ratings and application conditions; do not select from the headline power value alone.

Power class 380V-class output current 220V-class output current PV input AC input Order code
30kW 60A 55A 110-850V DC 220-400V AC Confirm exact order model
Selection note: Confirm whether the project needs 220V home power, 220V pump output, 380V three-phase output or a project-specific simultaneous combination. Voltage and mode settings must match the wiring.

Technical Specifications

Item Verified specification
Input voltage PV 110-850V DC; AC 220-400V
Operating modes Power mode and water-pump mode
Output voltage classes 220V and 380V selectable according to wiring and LCD settings
Output frequency Pump mode: 0-400Hz; home mode: 50Hz
Protection level IP20
Working temperature -10°C to 60°C
Overload protection 120% stated
Display LCD mode, voltage, current and operating-data display
Options / project configuration: Simultaneous 220V/380V use, Wi-Fi hardware, battery integration and external switching/protection are project-dependent. Confirm the final diagram before quotation and installation.

Typical Applications

Remote homes and farms
Agricultural facilities
Water pumping and irrigation
Workshops and processing equipment
Mixed single- and three-phase sites
Sites with PV and AC backup sources

Information Required for Selection

  • Continuous and surge load power, load type and simultaneous-load requirement
  • Required output voltage, phase and frequency
  • PV module Voc, Vmp, current, wattage and proposed series/parallel layout
  • Battery chemistry, nominal voltage, capacity and BMS protocol when batteries are used
  • Utility or generator input voltage and required source priority
  • Site temperature, altitude, enclosure requirement, quantity and destination

A dependable quotation requires the complete operating profile, not only the nominal power. IDEEI reviews voltage, current, source or motor data, duty, environment, required options and destination together so the final configuration, accessories, protection devices and commercial scope can be stated clearly.

Engineering & Installation Notes

Separate continuous load from startup surge loads such as pumps, compressors and motors. Check the PV string at the lowest expected temperature so open-circuit voltage remains below the product limit. Where a battery is used, match chemistry, nominal voltage, charge current and communication protocol. Source priority, transfer behavior, neutral arrangement and generator compatibility must be confirmed for the complete system.

Installation and commissioning must be completed by qualified electrical personnel. Isolate all energy sources before wiring, verify terminal functions against the current manual, provide protective devices and grounding, and apply the published derating guidance for altitude, temperature, enclosure and cable length. Product-page data supports preliminary selection and does not replace project engineering or local code compliance.

Frequently Asked Questions

Can this inverter work without batteries?

Battery-free operation is supported only where it is stated for the ALLINONE 30kW and where the available PV or utility source can support the connected load. Confirm the intended operating mode before wiring.

How should the PV array be sized?

Use the selected model’s permitted PV voltage window and maximum open-circuit voltage. Check cold-weather Voc, operating Vmp, current, total array power and local irradiance rather than selecting from inverter kW alone.

Can utility power or a generator be connected?

Supported AC input and source-priority modes depend on the selected series. The transfer arrangement, protection devices and neutral/earthing scheme must be confirmed for the installation.

Is Wi-Fi or battery BMS communication standard?

Communication is model- and project-dependent. Confirm Wi-Fi, GPRS, RS232, RS485 and the required lithium-battery protocol before ordering.

What information is needed for a quotation?

Send the load list, surge loads, required output voltage and phase, PV module data, battery information, backup-source data, operating schedule, quantity and delivery country.

Engineering selection & bulk orders

Send the nameplate. We size the drive.

Send the required electrical and application data, quantity and destination. Our team will confirm the suitable model, options and quotation scope.

Request a Quote
Email Us
WhatsApp

Email: sales@ideeishop.com · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Related Models

( REL ) — SOLAR INVERTER
/01 IDEEI ALLINONE 22kW Solar Inverter 220V + 380V 22kW · ALLINONE · 220V In StockRFQ
/02 IDEEI ALLINONE 18kW Solar Inverter 220V + 380V 18kW · ALLINONE · 220V In StockRFQ
/03 IDEEI ALLINONE 15kW Solar Inverter 220V + 380V 15kW · ALLINONE · 220V In StockRFQ
/04 IDEEI ALLINONE 11kW Solar Inverter 220V + 380V 11kW · ALLINONE · 220V In StockRFQ