Write a distributor RFQ for factory VFD presets with an approved baseline, site-specific settings, a compatibility register and sample acceptance.

Define the factory baseline and the site worksheet
A repeat order can reuse a reviewed baseline when the drive hardware, firmware and application match. Start with named fields such as display language, a requested command interface or units for the operator display. Ask what the supplier can actually preset and what must be reviewed during commissioning. Record the motor nameplate, control source, safety-related functions and process limits in the site worksheet, with a named person responsible for validation.
Make each profile traceable
Use a stable profile ID and revision. Record the matching drive part number, voltage class, firmware and option cards. For example, put two panel variants with different control interfaces on separate lines in the order even if their power rating is identical. Ask for a readable parameter list with a change log and the supported recovery procedure for the exact model.
Accept one sample before repeating the order
Agree whose job it is to verify the profile and gate the first production lot. The acceptance sheet should record the drive serial number, profile revision, inventoried differences and approval date. Have qualified staff verify external commands, alarms and required interlocks under the approved commissioning plan. Ask how a firmware or hardware substitution will be communicated before shipment.
Bring the record into the next order
Send the suppliers the fixture or panel reference, intended motor families, I/O schedule and quantity. Request separate prices for the baseline programming, documentation and any site support. Retain a blank site worksheet and the signed sample record with the purchase order.
Pump VFD handover checklist · Request an IDEEI quote · ABB drive documentation