Description
⚡ 11kW Dual-Output Powerhouse: Farm + Home Energy Solution
The IDEEI ALLINONE 11kW eliminates equipment redundancy by delivering 220V single-phase power for 200+㎡ homesteads and 380V three-phase output for 7.5-11kW irrigation pumps from a single unit. Engineered for medium-scale agricultural operations requiring reliable water management and residential power without diesel dependency.
Industrial-Grade Features
🔋 98% MPPT Efficiency & Ultra-Wide Voltage Range
- Advanced MPPT algorithm with 98% peak efficiency across DC 110V – 850V input range
- Compatible with 11kW+ PV arrays: configure for high-voltage strings (reduced cable loss) or high-current arrays
- Real-time maximum power point tracking maintains optimal harvest during partial cloud cover
- Supports oversized arrays up to 13kW for extended pumping hours
🛡️ Integrated Pump Protection & Industrial Automation
- Soft-start VFD technology: Eliminates mechanical stress and water-hammer in pipes up to 120m lift
- Intelligent dry-run protection with automatic restart after water level recovery
- Frequency ramping 0-50/60Hz for precise flow control—match pump output to crop requirements
- Overload and phase-loss protection safeguards 3-phase motors in harsh field conditions
⚡ Simultaneous Dual-Output Architecture
- Independent power circuits: 220V household (L-N) and 380V pump (U/V/W) operate concurrently
- Auto Mode prioritizes critical home loads, then allocates surplus PV power to irrigation
- Pure sine wave output (<3% THD) ensures compatibility with sensitive electronics and pump VFDs
- Seamless switching between Power Mode, Pump Mode, Auto Mode, and Manual frequency control
💰 Total Cost of Ownership Reduction
- Eliminates separate 11kW VFD purchase: Saves $800-2,000 in hardware costs
- No external output reactors, filters, or contactors required—reduces installation time by 50%
- Compact footprint (vs. separate inverter + VFD setup) minimizes shelter requirements
- CE and ISO 9001 certification ensures 10+ year lifespan with minimal maintenance
Technical Specifications — ALLINONE Series
| Parameter | IDEEI-7.5KW | IDEEI-11KW | IDEEI-15KW |
|---|---|---|---|
| Rated Output Power | 7.5 kW | 11 kW | 15 kW |
| 220V Output (Single-Phase) | 220VAC ±5%, 50/60Hz Pure Sine Wave | ||
| 380V Output (Three-Phase) | 380VAC ±5%, 0–50/60Hz (V/F Adjustable) | ||
| Recommended Pump Size | 5.5-7.5 kW | 7.5-11 kW | 11-15 kW |
| PV Input Voltage Range | DC 110V – 850V | ||
| MPPT Efficiency | Up to 98% | ||
| Max Pump Lift (No Reactor) | 120 meters | ||
| Output Terminals | UV: 220V single-phase pump U/V/W: 380V three-phase pump/motor L/N: 220V household AC |
||
| Operation Modes | Power | Pump | Auto | Manual (V/F) | ||
| Waveform Quality | Pure Sine Wave (THD <3%) | ||
| Enclosure Rating | IP20 (Indoor/weather-protected installation) | ||
| Certification | CE Certified | ISO 9001 Quality Management | ||
Optimized For
- Medium-scale farms (10-50 acres) with mixed irrigation and housing
- 7.5-11kW deep-well submersible pumps (120m max lift)
- Off-grid homesteads requiring 8-12kWh daily household consumption
- Drip/sprinkler irrigation systems with variable flow requirements
- Livestock operations with watering systems and facility power
- Replacement of diesel pump generators for cost reduction
⚠️ Critical Installation Requirements
- U/V/W terminals deliver 380V three-phase power ONLY—connection of 220V appliances will cause permanent damage
- UV terminal is isolated for 220V single-phase pumps ONLY
- Verify pump nameplate voltage (380V/3-phase vs 220V/1-phase) before wiring
- 11kW continuous output requires adequate battery bank (48V/400Ah+ recommended) or oversized PV array
- Professional installation required for 380V three-phase connections
Frequently Asked Questions
Size Your 11kW Integrated System
Get PV array configuration assistance and compatibility verification for your specific pump model. Bulk agricultural pricing available.
📧 sales@ideeishop.com | 📱 WhatsApp: +86 183 5724 1165
Reviews
There are no reviews yet.