00 — INVERSOR DE USO GERAL

Inversor Vetorial de Alto Desempenho IDEEI 3300 0,75-90kW | 380V

0.75kW1.5kW2.2kW4kW5.5kW7.5kW11kW15kW18.5kW22kW30kW37kW45kW55kW75kW90kW

In Stock Price on Request MOQ 1 UNIT

Inversor vetorial IDEEI 3300 com controle SFVC/CLVC/V/F para automação industrial.

Get a Quote→ 24h Reply WhatsApp→ Chat Now

F01SFVC, CLVC and V/F motor control modes
F020.75kW to 90kW three-phase 380V model range
F03180% startup torque at 0Hz in CLVC
F041:1000 speed range and ±0.02% stability in CLVC
F05Four motor parameter groups with independent auto-tuning

DOC DS-DESCSERIES INVERSOR DE USO GERALREV 2026-A

Inversor Vetorial de Alto Desempenho IDEEI 3300

The IDEEI inversor vetorial de alto desempenho fornece controle preciso de velocidade e torque para maquinário industrial exigente. Its 0.75kW to 90kW three-phase 380V range supports sensorless flux vector control, closed-loop vector control and V/F operation, with four independent motor parameter groups and expandable communications.

0,75-90kW
380V trifásico
SFVC / CLVC / V/F
Controle de quatro motores

Características de controle vetorial 3300

🎯 Controle vetorial de precisão

SFVC supports a 1:100 speed range, while encoder-based CLVC extends the range to 1:1000 with ±0.02% speed stability and 180% startup torque at 0Hz.

🔄 Multi-Motor Switching

Four motor parameter groups can be switched by terminals, with independent control modes and motor auto-tuning for flexible machine configurations.

🛡️ Protection and Stability

Motor short-circuit detection, phase-loss, overcurrent, overvoltage, undervoltage, overheat and overload protection safeguard the drive system.

🔌 Industrial Networking

Modbus RTU is supported, with PROFIBUS-DP, CANlink, CANopen and programmable expansion options available according to project requirements.

Control Performance

Item	SFVC	CLVC	V/F / P Type
Maximum frequency	0-300Hz vector control	0-300Hz vector control	0-320Hz
Startup torque	150% at 0.5Hz for G type	180% at 0Hz for G type	100% at 0.5Hz for P type
Speed range	1:100	1:1000	Application dependent
Speed stability	±0.5%	±0.02%	Application dependent
Overload	G type: 150% for 60s; 180% for 3s		P type: 120% for 60s; 150% for 3s

380V Model Selection

Power Range	Models	Output Current Range
0.75-7.5kW	3300-0R7G-4 to 3300-7R5G-4	2.1-17A
11-30kW	3300-011G-4 to 3300-030G-4	25-60A
37-55kW	3300-037G-4 to 3300-055G-4	75-112A
75-90kW	3300-075G-4 to 3300-090G-4	150-176A

Selection input: send the motor nameplate, load curve, control mode, required torque, speed range, encoder information, duty cycle, braking demand and communication protocol.

Optional configuration: LCD keypad, braking hardware, I/O expansion, programmable card, PROFIBUS-DP, CANlink and CANopen options must be confirmed before ordering. CLVC requires compatible feedback hardware.

Aplicações típicas

CNC machinery, winding and tension control, conveyors, cranes, mixers, compressors, extruders, textile machinery, metal processing, woodworking, printing, fans and pumps.

Installation: the manual specifies -10°C to 40°C operation, derating above 40°C, maximum 50°C, and rated use below 1,000m altitude. Install indoors in a dust-free, non-corrosive location with adequate cooling.

Perguntas frequentes

What is the difference between SFVC and CLVC?

SFVC operates without encoder feedback. CLVC uses compatible feedback hardware for higher low-speed torque, a wider speed range and tighter speed stability.

Can one inverter store multiple motor parameters?

Yes. The 3300 provides four motor parameter groups with independent auto-tuning and control settings. Confirm the required switching logic during commissioning.

Which communication protocol is standard?

Modbus RTU is supported. PROFIBUS-DP, CANlink, CANopen and programmable control options depend on the selected expansion hardware.

Do I select G type or P type?

Choose G type for constant-torque and heavy-duty loads. P type is intended for variable-torque loads such as fans and pumps. Use motor current and duty cycle for final selection.

Get 3300 Vector Inverter Selection Support

Send the motor nameplate, load type, required control mode, quantity and destination country for engineering confirmation and quotation.

Envie um e-mail WhatsApp

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Get a Quote→ Email Us WhatsApp+86 183 5724 1165