00 — INVERSOR PARA BOMBAS SOLARES

Inversor para Bombas Solares IDEEI 11PV MPPT 2,2–37kW CA/CC

11PV2.2–37kW220–240V380–440V1 Phase3 PhaseMPPTAC/DC

In Stock Price on Request MOQ 1 UNIT

Inversor para bombas solares IDEEI 11PV MPPT com suporte a motores AM/PMSM e funções remotas opcionais.

Get a Quote→ 24h Reply WhatsApp→ Chat Now

F01MPPT Efficiency Above 99.6%: The supplied operation manual states fast-response MPPT with stable operating efficiency above 99.6%.
F02Induction & PMSM Pump Control: The platform supports AC induction pumps and permanent-magnet synchronous pump motors with correct setup.
F03Automatic Pump Protection: Dry-run, phase-loss, maximum-current, low-power and low-frequency protections are documented.
F04Automation & Monitoring: Sleep/wake logic and water-level control are built in; GPRS remote functions and timer relay are optional.

DOC DS-DESCSERIES INVERSOR PARA BOMBAS SOLARESREV 2026-A

IDEEI · Controle de Bombeamento Solar

Inversor para Bombas Solares IDEEI 11PV MPPT 2,2–37kW

O 11PV está posicionado no catálogo de produtos aprovado como um inversor fotovoltaico para bombas com controle MPPT, cobrindo 2,2–37kW com opções CA/CC.

0.4–200kW220–240V / 380–440VMPPT 99%Suporte a bombas AM / PMSM

Principais características e benefícios

Partida e repouso automáticos

O catálogo indica operação automática de partida e repouso para condições solares variáveis.

Controle MPPT para bombas solares

Rastreamento do ponto de máxima potência indicado até ou acima de 99%, depending on the named series page.

Compatibilidade com motores

O catálogo indica suporte para motores de bomba AM e PMSM with the correct configuration.

Funções remotas opcionais

Funções Wi-Fi ou GPRS são opcionais onde indicadas in the series catalog.

Model Selection

The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.

Ramificação do catálogo	Faixa de potência	Fase de saída	Classe de tensão	Código do pedido
CA 1F 220–240V	0.4–55kW	Monofásico	220–240V	Confirme o modelo exato do pedido
CA 3F 220–240V	0.4–90kW	Trifásico	220–240V	Confirme o modelo exato do pedido
CA 3F 380–440V	0.4–200kW	Trifásico	380–440V	Confirme o modelo exato do pedido

Nota de seleção: O catálogo do produto confirma faixas de ramificação, não cada código de pedido or rated current. Use the pump nameplate to confirm the exact order model before creating a power-specific SKU page.

Especificações técnicas

Item	Especificação verificada
Catalog range	0.4–200kW
Voltage branches	220–240V and 380–440V
MPPT efficiency	99%
Motor support	AM and PMSM pumps
Operation	Automatic sunrise run and sleep/wake

Opções / configuração do projeto: Wi-Fi remote monitoring and AC/DC configuration must be confirmed for the selected model. Do not publish generic SG600 order codes as branded 11PV/11PV codes without an approved cross-reference.

Aplicações típicas

Urban water supply

Desert water management

Grassland animal husbandry

Aquaculture water supply

Agricultural irrigation

Remote-area pumping

Information Required for Model Selection

Pump rated power, voltage, phase and full-load current
Pump type and motor type (induction, PMSM or single-phase)
Required head, flow and daily operating time
PV module Voc, Vmp, power and planned series/parallel layout
Grid or generator backup requirement
Cable length, site altitude, ambient temperature and enclosure requirement

For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.

Installation & Derating Notes

Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.

Perguntas frequentes

Can the inverter run a pump directly from solar panels?

Yes. The 11PV is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected 220V and 380V classes model.

Can grid power or a generator be used as backup?

Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.

How should the inverter power be selected?

Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.

Does the system need batteries?

The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.

Is remote monitoring standard?

Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.

Seleção de engenharia e pedidos em volume

Envie a placa de identificação. Nós dimensionamos o inversor.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

Envie um e-mail
WhatsApp

Email: [email protected] · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Get a Quote→ Email Us WhatsApp+86 183 5724 1165