00 — INVERSOR PARA BOMBAS SOLARES

Controlador para Bombas Solares IDEEI LF-100 Baixa Tensão 40–130V CC MPPT

LF-10040V DC48V DC72V DC96V DC110V DC130V DCPMSM Pump

In Stock Price on Request MOQ 1 UNIT

Controlador para bombas solares IDEEI LF-100 de baixa tensão 40–130V CC com MPPT para sistemas de bomba PMSM.

Get a Quote→ 24h Reply WhatsApp→ Chat Now

F01MPPT Solar Tracking: The controller adjusts pump speed as available PV power changes, supporting direct solar water pumping.
F02Pump-Oriented Control: Automatic operating logic and pump protection functions support unattended water-supply applications.
F03AC/DC Project Flexibility: PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.
F04Engineering Selection: Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.

DOC DS-DESCSERIES INVERSOR PARA BOMBAS SOLARESREV 2026-A

IDEEI · Controle de Bombeamento Solar

Controlador para Bombas Solares IDEEI LF-100 Baixa Tensão 40–130V CC MPPT

O LF-100 converte energia do arranjo solar em saída CA controlada para bombas d’água. Suas ramificações de modelo verificadas cobrem sistemas de bomba PMSM CC48V / 72V / 96V; a seleção final deve seguir a corrente da bomba, tipo de motor e dados da string PV.

40–130V CC48–110V MPPTSaída máxima 11,8AControle de bomba PMSM

Principais características e benefícios

Rastreamento solar MPPT

O controlador ajusta a velocidade da bomba conforme a energia PV disponível muda, suportando bombeamento solar direto de água.

Controle orientado a bombas

Automatic operating logic and pump protection functions support unattended water-supply applications.

AC/DC Project Flexibility

PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.

Engineering Selection

Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.

Model Selection

The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.

Controller	PV input	Optimal MPPT range	Motor	Power
LF-100	40–130V CC	48–110V DC	Permanent-magnet synchronous pump motor	Confirm for selected pump

Nota de seleção: The manual does not publish a kW model table. Match the controller and factory motor parameters using the pump voltage, current and PMSM data; mark power as Confirm for selected pump.

Especificações técnicas

Item	Especificação verificada
PV input range	40–130V CC
Optimal MPPT voltage	48–110V DC
Maximum output current	11.8A
Speed range	0–3000rpm
Cooling	Air cooled
Working environment	-15°C to 60°C

Opções / configuração do projeto: Motor parameters are factory matched and are not intended for unrestricted user setting. Confirm the pump/controller set, float wiring and PV array before order.

Aplicações típicas

Agricultural irrigation

Borehole and deep-well pumps

Livestock water supply

Reservoir and tank filling

Rural water supply

Pond and forestry irrigation

Information Required for Model Selection

Pump rated power, voltage, phase and full-load current
Pump type and motor type (induction, PMSM or single-phase)
Required head, flow and daily operating time
PV module Voc, Vmp, power and planned series/parallel layout
Grid or generator backup requirement
Cable length, site altitude, ambient temperature and enclosure requirement

For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.

Installation & Derating Notes

Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.

Perguntas frequentes

What type of motor is LF-100 designed for?

The supplied manual describes low-voltage permanent-magnet synchronous solar submersible pump systems.

What PV voltage can be used?

The verified solar input range is 40–130V CC, with an optimal MPPT operating range of 48–110V DC.

Can the power rating be selected from kW alone?

No. The manual does not provide a public kW model table; send the pump voltage, current and motor data for matching.

Does it support water-level control?

Yes. The manual documents high-water, low-water and source-water float control.

Who should install the controller?

Qualified electrical personnel should verify polarity, motor wiring, grounding and PV open-circuit voltage before commissioning.

Seleção de engenharia e pedidos em volume

Envie a placa de identificação. Nós dimensionamos o inversor.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

Envie um e-mail
WhatsApp

Email: [email protected] · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Get a Quote→ Email Us WhatsApp+86 183 5724 1165

Controlador para Bombas Solares IDEEI LF-100 Baixa Tensão 40–130V CC MPPT

Controlador para Bombas Solares IDEEI LF-100 Baixa Tensão 40–130V CC MPPT

Principais características e benefícios

Rastreamento solar MPPT

Controle orientado a bombas

AC/DC Project Flexibility

Engineering Selection

Model Selection

Especificações técnicas

Aplicações típicas

Information Required for Model Selection

Installation & Derating Notes

Perguntas frequentes

What type of motor is LF-100 designed for?

What PV voltage can be used?

Can the power rating be selected from kW alone?

Does it support water-level control?

Who should install the controller?

Envie a placa de identificação. Nós dimensionamos o inversor.

Related Models