IDEEI 118 عاكس مضخة شمسية كتابي 0.4–500kW بتقنية MPPT

IDEEI 118 عاكس مضخة شمسية كتابي 0.4–500kW

The 118 series combines a space-saving book-style enclosure with multiple MPPT modes for single-phase and three-phase pump projects. The catalog confirms 220–240V branches up to 55/90kW and a 380–440V branch up to 500kW; the detailed current table remains limited to verified manual rows.

Branch	Pump power	PV input	Output	Recommended PV voltage	Rated output current
118-D3	0.75kW	DC150–450V	3-phase 220–240VAC	360–430V	4A
118-D3	1.5kW	DC150–450V	3-phase 220–240VAC	360–430V	7A
118-D3	2.2kW	DC150–450V	3-phase 220–240VAC	360–430V	10A
118-D3	4kW	DC150–450V	3-phase 220–240VAC	360–430V	16A
118-D3	5.5kW	DC150–450V	3-phase 220–240VAC	360–430V	20A
118-D3	7.5kW	DC150–450V	3-phase 220–240VAC	360–430V	30A
118-D3	11kW	DC150–450V	3-phase 220–240VAC	360–430V	42A
118-SS2	0.75kW	DC150–450V	single-phase 220–240VAC	360–430V	7A
118-SS2	1.5kW	DC150–450V	single-phase 220–240VAC	360–430V	10A
118-SS2	2.2kW	DC150–450V	single-phase 220–240VAC	360–430V	16A
118-SS2	4kW	DC150–450V	single-phase 220–240VAC	360–430V	30A
118-SS2	5.5kW	DC150–450V	single-phase 220–240VAC	360–430V	42A
118-SS2	7.5kW	DC150–450V	single-phase 220–240VAC	360–430V	55A
118-SS2	11kW	DC150–450V	single-phase 220–240VAC	360–430V	80A
118-SS2	15kW	DC150–450V	single-phase 220–240VAC	360–430V	110A
118-D5	0.75kW	DC250–900V	3-phase 380–460VAC	620–850V	3A
118-D5	1.5kW	DC250–900V	3-phase 380–460VAC	620–850V	4A
118-D5	2.2kW	DC250–900V	3-phase 380–460VAC	620–850V	6A
118-D5	4kW	DC250–900V	3-phase 380–460VAC	620–850V	10A
118-D5	5.5kW	DC250–900V	3-phase 380–460VAC	620–850V	13A
118-D5	7.5kW	DC250–900V	3-phase 380–460VAC	620–850V	17A
118-D5	11kW	DC250–900V	3-phase 380–460VAC	620–850V	25A
118-D5	15kW	DC250–900V	3-phase 380–460VAC	620–850V	32A
118-D5	18.5kW	DC250–900V	3-phase 380–460VAC	620–850V	38A
118-D5	22kW	DC250–900V	3-phase 380–460VAC	620–850V	45A
118-D5	30kW	DC250–900V	3-phase 380–460VAC	620–850V	60A
118-T3	37kW	DC350–900V	3-phase 380–440VAC	620–850V	75A
118-T3	45kW	DC350–900V	3-phase 380–440VAC	620–850V	90A
118-T3	55kW	DC350–900V	3-phase 380–440VAC	620–850V	110A
118-T3	75kW	DC350–900V	3-phase 380–440VAC	620–850V	150A
118-T3	90kW	DC350–900V	3-phase 380–440VAC	620–850V	180A
118-T3	110kW	DC350–900V	3-phase 380–440VAC	620–850V	210A

Selection note: Confirm the pump rated current, voltage, phase and motor type. For submersible pumps or long motor cables, the next suitable current rating and an output reactor may be required.

Item	Verified specification
فروع طاقة الكتالوج	1PH 220–240V: 0.4–55kW; 3PH 220–240V: 0.4–90kW; 3PH 380–440V: 0.4–500kW
Maximum PV input voltage	Up to 900V DC
MPPT	Multiple modes; catalog states above 99%
Isolation	عزل مدمج للتيار المستمر والمتردد
Communication	RS485 مدمج؛ اتصال GPRS مدعوم بتكوين المشروع

Options / project configuration: يتطلب وضع التيار المتردد/المستمر المخصص والتحكم عن بُعد عبر GPRS تأكيدًا. The catalog gives branch ranges but not every high-power order code or rated current; models outside the detailed manual table must be confirmed before publishing an individual SKU page.

• Pump rated power, voltage, phase and full-load current
• Pump type and motor type (induction, PMSM or single-phase)
• Required head, flow and daily operating time
• PV module Voc, Vmp, power and planned series/parallel layout
• Grid or generator backup requirement
• Cable length, site altitude, ambient temperature and enclosure requirement

Can the inverter run a pump directly from solar panels?

Yes. The 118 Series is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected 220V and 380V classes model.

Can grid power or a generator be used as backup?

Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.

How should the inverter power be selected?

Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.

Does the system need batteries?

The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.

Is remote monitoring standard?

Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.

Send the nameplate. We size the drive.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

Email Us
WhatsApp

Email: [email protected] · WhatsApp: +86 183 5724 1165