00 — عاكس مضخات الطاقة الشمسية

IDEEI LF-100 وحدة تحكم مضخة شمسية منخفضة الجهد 40–130V

LF-10040V DC48V DC72V DC96V DC110V DC130V DCPMSM Pump

In Stock Price on Request MOQ 1 UNIT

IDEEI LF-100 هي وحدة تحكم مضخة شمسية منخفضة الجهد 40–130V تيار مستمر.

Get a Quote→ 24h Reply WhatsApp→ Chat Now

F01MPPT Solar Tracking: The controller adjusts pump speed as available PV power changes, supporting direct solar water pumping.
F02Pump-Oriented Control: Automatic operating logic and pump protection functions support unattended water-supply applications.
F03AC/DC Project Flexibility: PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.
F04Engineering Selection: Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.

DOC DS-DESCSERIES عاكس مضخات الطاقة الشمسيةREV 2026-A

IDEEI · التحكم في ضخ الطاقة الشمسية

IDEEI LF-100 وحدة تحكم مضخة شمسية منخفضة الجهد تيار مستمر 40–130V MPPT

The LF-100 converts solar-array power into controlled AC output for water pumps across Confirm for selected pump. Its verified model branches cover DC48V / 72V / 96V PMSM pump systems; final selection must follow the pump current, motor type and PV string data.

تيار مستمر 40–130V48–110V MPPT11.8A max outputPMSM pump control

المزايا والفوائد الرئيسية

MPPT Solar Tracking

The controller adjusts pump speed as available PV power changes, supporting direct solar water pumping.

Pump-Oriented Control

Automatic operating logic and pump protection functions support unattended water-supply applications.

AC/DC Project Flexibility

PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.

Engineering Selection

Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.

اختيار الطراز

The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.

Controller	PV input	Optimal MPPT range	Motor	Power
LF-100	تيار مستمر 40–130V	48–110V DC	Permanent-magnet synchronous pump motor	Confirm for selected pump

Selection note: The manual does not publish a kW model table. Match the controller and factory motor parameters using the pump voltage, current and PMSM data; mark power as Confirm for selected pump.

المواصفات الفنية

Item	Verified specification
PV input range	تيار مستمر 40–130V
Optimal MPPT voltage	48–110V DC
Maximum output current	11.8A
Speed range	0–3000rpm
Cooling	Air cooled
Working environment	-15°C to 60°C

Options / project configuration: Motor parameters are factory matched and are not intended for unrestricted user setting. Confirm the pump/controller set, float wiring and PV array before order.

التطبيقات النموذجية

Agricultural irrigation

Borehole and deep-well pumps

Livestock water supply

Reservoir and tank filling

Rural water supply

Pond and forestry irrigation

المعلومات المطلوبة لاختيار الطراز

Pump rated power, voltage, phase and full-load current
Pump type and motor type (induction, PMSM or single-phase)
Required head, flow and daily operating time
PV module Voc, Vmp, power and planned series/parallel layout
Grid or generator backup requirement
Cable length, site altitude, ambient temperature and enclosure requirement

For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.

ملاحظات التركيب وخفض القدرة

Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.

الأسئلة الشائعة

What type of motor is LF-100 designed for?

The supplied manual describes low-voltage permanent-magnet synchronous solar submersible pump systems.

What PV voltage can be used?

The verified solar input range is تيار مستمر 40–130V, with an optimal MPPT operating range of 48–110V DC.

Can the power rating be selected from kW alone?

No. The manual does not provide a public kW model table; send the pump voltage, current and motor data for matching.

Does it support water-level control?

Yes. The manual documents high-water, low-water and source-water float control.

Who should install the controller?

Qualified electrical personnel should verify polarity, motor wiring, grounding and PV open-circuit voltage before commissioning.

الاختيار الهندسي والطلبات الكبيرة

أرسل لوحة البيانات. نحدد حجم المحرك.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

راسلنا
واتساب

Email: [email protected] · واتساب: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Get a Quote→ Email Us WhatsApp+86 183 5724 1165