FÁBRICA ONLINE — HAIYAN, ZHEJIANG
SEG–SÁB 8:30–17:30 (GMT+8) [email protected] WA +86 183 5724 1165
ENESARPT-BR
Solicitar cotação→ Contato
Home/Products/Inversor para guindaste/VFD para Guindastes IDEEI S700 0,75-400kW Dedicado a Içamento
VFD para Guindastes IDEEI S700 0,75-400kW Dedicado a Içamento
00 — INVERSOR PARA GUINDASTE

VFD para Guindastes IDEEI S700 0,75-400kW Dedicado a Içamento

0.75kW1.5kW2.2kW4kW5.5kW7.5kW11kW15kW18.5kW22kW30kW37kW45kW55kW75kW90kW110kW132kW160kW200kW220kW250kW280kW315kW355kW400kW
In Stock Price on Request MOQ 1 UNIT

VFD para guindastes IDEEI S700 380V de 0,75-400kW dedicado a içamento, com controle SFVC, CLVC e V/F, sequenciamento de freio e proteção para pontes rolantes e pórticos.

Get a Quote→ 24h Reply WhatsApp→ Chat Now
  • F010.75-400kW verified three-phase 380V model range
  • F02SFVC, CLVC and V/F control modes
  • F03Up to 200% startup torque for lifting loads
  • F04Crane brake time-sequence and low-voltage anti-hook-glide control
  • F05Light-load high-speed and accurate positioning functions
DOC DS-DESCSERIES INVERSOR PARA GUINDASTEREV 2026-A

INVERSOR ESPECIAL PARA IÇAMENTO

VFD para Guindastes IDEEI S700

The VFD para Guindastes IDEEI S700 é um inversor CA especializado para guindastes, talhas e equipamentos de içamento industrialuipment. The three-phase 380V series covers 0.75kW to 400kW and combines SFVC, CLVC and V/F control with high starting torque, crane brake timing, overload protection, light-load high-speed operation and positioning functions.

0.75–400kW
Trifásico 380V
Torque de partida 200%
SFVC · CLVC · V/F
Máximo 150Hz

Principais características e benefícios

⚡ Alto torque de partida

  • 150% a 0,5Hz sob controle V/F
  • 200% a 0,5Hz sob SFVC
  • 200% a 0,0Hz sob CLVC
  • Controle forte em baixa velocidade para cargas de içamento

🛡️ Proteção para guindastes

  • Controle de sequência temporal do freio mecânico
  • Parada controlada em baixa tensão
  • Restrição de içamento após sobrecarga
  • Controle de bloqueio por sobretensão e sobrecorrente

🏗️ Controle inteligente de içamento

  • Cálculo de alta velocidade com carga leve
  • Posicionamento de parada sem deslocamento lento
  • Três grupos de parâmetros do motor
  • Suporte para comutação multi-motor

🔌 Integração flexível

  • Controle por painel, terminal ou comunicação
  • Múltiplas opções de interface de encoder
  • E/S digital e analógica expansível
  • Placas opcionais de comunicação industrial

Model Selection — Trifásico 380V

Selecione o inversor pela corrente nominal de saída e regime real de içamento, não by motor power alone. The complete brake and feedback configuration must be confirmed for the selected model.

Modelo S700 Potência do motor Capacidade Corrente de entrada Corrente de saída
S700-0.75KW-4 0.75kW 1.5kVA 3.4A 2.1A
S700-1.5KW-4 1.5kW 3.0kVA 5.0A 3.8A
S700-2.2KW-4 2.2kW 4.0kVA 5.8A 5.1A
S700-4KW-4 4kW 5.9kVA 10.5A 9.0A
S700-5.5KW-4 5.5kW 8.9kVA 14.6A 13.0A
S700-7.5KW-4 7.5kW 11.0kVA 20.5A 17.0A
S700-11KW-4 11kW 17.0kVA 26.0A 25.0A
S700-15KW-4 15kW 21.0kVA 35.0A 32.0A
S700-18.5KW-4 18.5kW 24.0kVA 38.5A 37.0A
S700-22KW-4 22kW 30.0kVA 46.5A 45.0A
S700-30KW-4 30kW 40.0kVA 62.0A 60.0A
S700-37KW-4 37kW 57.0kVA 76.0A 75.0A
S700-45KW-4 45kW 69.0kVA 92.0A 91.0A
S700-55KW-4 55kW 85.0kVA 113.0A 112.0A
S700-75KW-4 75kW 114.0kVA 157.0A 150.0A
S700-90KW-4 90kW 134.0kVA 180.0A 176.0A
S700-110KW-4 110kW 160.0kVA 214.0A 210.0A
S700-132KW-4 132kW 192.0kVA 256.0A 253.0A
S700-160KW-4 160kW 231.0kVA 307.0A 304.0A
S700-200KW-4 200kW 250.0kVA 385.0A 377.0A
S700-220KW-4 220kW 280.0kVA 430.0A 426.0A
S700-250KW-4 250kW 355.0kVA 468.0A 465.0A
S700-280KW-4 280kW 396.0kVA 525.0A 520.0A
S700-315KW-4 315kW 445.0kVA 590.0A 585.0A
S700-355KW-4 355kW 500.0kVA 665.0A 650.0A
S700-400KW-4 400kW 565.0kVA 785.0A 725.0A
Nota de seleção: Drive output current must be equal to or greater than the motor rated current. Check lifting load, duty cycle, brake arrangement, encoder and acceleration/deceleration requirements before confirming the model.

General Specifications

Item Especificação verificada
Control modes Sensorless flux vector control, closed-loop vector control and V/F control
Maximum frequency 150Hz
Carrier frequency 0.5–16kHz, automatically adjusted according to load characteristics
Speed range 1:100 under SFVC; 1:1000 under CLVC
Speed stability ±0.5% under SFVC; ±0.02% under CLVC
Torque-control accuracy ±5% under CLVC
Overload capacity 150% of rated current for 60 seconds; 180% for 3 seconds
Torque boost Fixed boost or customized boost from 0.1% to 30.0%
Ramp mode Straight-line ramp or S-curve ramp
DC braking current 0.0%–120.0% of rated current
Standard input 5 digital inputs and 2 analog inputs
Standard output High-speed pulse output, digital output, relay output and analog output
Ambient temperature −10°C to +40°C; derate 2% per °C from 40°C to 50°C
Altitude and humidity Below 1000m without derating; less than 95% RH without condensation

Optional and Project-Dependent Configuration

Communication

Isolated RS485 Modbus, PROFIBUS-DP, CANlink and CANopen cards according to the selected system.

Encoder Feedback

Differential, open-collector and UVW encoder interfaces, plus resolver support with the corresponding card.

Crane Process Card

Optional offset correction, synchronization, positioning, anti-swaying and grabbing control.

Configuration notice: Optional cards and project-dependent functions are not standard on every unit. Specify all required functions when requesting a quotation.

Aplicações típicas

Overhead Cranes
Gantry Cranes
Electric Hoists
Port Cranes
Shipyard Hoists
Material Handling

Information Required for Model Selection

  1. Motor nameplate, motor type, rated voltage, power and current
  2. Crane or hoist type, rated lifting load and duty cycle
  3. Required control mode and encoder type, when closed-loop control is used
  4. Mechanical brake arrangement and required braking frequency
  5. Quantity, destination country or port and required optional communication

Installation Notes

  • Install indoors, away from direct sunlight, dust, corrosive gas, combustible gas, oil mist, vapor, dripping water and salt.
  • Use shielded encoder cable and ensure reliable grounding.
  • Do not install a capacitor or surge suppressor on the AC drive output.
  • Do not start or stop the drive by repeatedly switching the input contactor.
  • Installation, wiring and commissioning must be completed by qualified personnel in accordance with the manual and local requirements.

Perguntas frequentes

What is the S700 power range?

The S700 manual lists three-phase 380V models from 0.75kW to 400kW.

Does the S700 support closed-loop vector control?

Yes. It supports CLVC, SFVC and V/F control. CLVC requires a compatible encoder and the corresponding feedback interface.

What is the maximum startup torque?

The S700 provides 200% startup torque at 0.0Hz under CLVC and 200% a 0,5Hz sob SFVC.

Can it control a mechanical crane brake?

Yes. The S700 provides crane-specific brake time-sequence control. The external brake circuit and braking components must be selected for the actual load and duty cycle.

Are anti-sway and synchronized lifting standard?

No. Offset correction, synchronization, positioning, anti-swaying and grabbing require the optional crane process card and project configuration.

Need Modelo S700 Selection or Bulk Pricing?

Send the motor nameplate, lifting load, voltage, brake arrangement, encoder type, quantity and destination. Our team will help confirm the appropriate drive and optional configuration.

Solicitar orçamentoWhatsAppEnvie um e-mail

Zhejiang Qibin Technology Co., Ltd. · Haiyan, Zhejiang, China

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)
Get a Quote→ Email Us WhatsApp+86 183 5724 1165