Inversor para bombas solares IDEEI S319 0,4–315kW com controle MPPT para aplicações fotovoltaicas de bombeamento d'água.
A série S319 foi projetada para aplicações fotovoltaicas de bombeamento d’água de 0,4–315kW. O catálogo aprovado confirma as ramificações de potência e tensão abaixo; códigos SKU exatos e classificações de corrente permanecem dependentes da seleção.
Starts and sleeps automatically according to solar conditions.
Maximum-power-point tracking is stated up to 99%.
The catalog lists waterless protection without sensors.
Wi-Fi and GPRS modules are optional; timing is also optional.
The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.
| Catalog branch | Power range | Output phase | Voltage class | Order code |
|---|---|---|---|---|
| AC 1PH 220–240V | 0.4–7.5kW | Single phase | 220–240V | Confirm exact order model |
| AC 3PH 220–240V | 0.4–15kW | Three phase | 220–240V | Confirm exact order model |
| AC 3PH 380–440V | 0.4–315kW | Three phase | 380–440V | Confirm exact order model |
| Item | Especificação verificada |
|---|---|
| Catalog power branches | AC 1PH 220–240V: 0.4–7.5kW; AC 3PH 220–240V: 0.4–15kW; AC 3PH 380–440V: 0.4–315kW |
For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.
Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.
Yes. The S319 Series is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected 220–240V and 380–440V branches model.
Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.
Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.
The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.
Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.
Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.
Email: [email protected] · WhatsApp: +86 183 5724 1165
Inversor Solar para Bombeamento QB100-PV Carcaça de Ferro Branca 45-280kW
45kW · 55kW · 75kW
In StockRFQ
Inversor Solar para Bombeamento QB100-PV Carcaça de Plástico Branca 0,4-37kW
0.4kW · 0.75kW · 1.5kW
In StockRFQ
IDEEI S81 Inversor de Frequência Híbrido Solar para Bombas 0,75–200kW AC/DC
75–200 kW · S81 D3 · S81 D5
In StockRFQ
IDEEI S80 Inversor de Frequência Solar para Bombas 0,75–200kW MPPT VFD
75–200 kW · S80 D3 · S80 D5
In StockRFQ
Dúvidas sobre seleção, preços por volume ou envio? Fale diretamente conosco.
Iniciar conversa no WhatsApp →Questions about model selection, bulk pricing or shipping? Chat with us directly.
Start WhatsApp Chat →