FÁBRICA ONLINE — HAIYAN, ZHEJIANG
SEG–SÁB 8:30–17:30 (GMT+8) [email protected] WA +86 183 5724 1165
Solicitar cotação→ Contato
Home/Products/Inversor para bombas solares/Inversor Solar para Bombeamento QB100-PV Carcaça de Ferro Branca 45-280kW
00 — INVERSOR PARA BOMBAS SOLARES

Inversor Solar para Bombeamento QB100-PV Carcaça de Ferro Branca 45-280kW

45kW55kW75kW90kW110kW132kW160kW185kW200kW250kW280kWQB100-PVWhiteIron Shell400V3 Phase
In Stock Price on Request MOQ 1 UNIT

Inversor solar para bombeamento QB100-PV 45–280kW com carcaça de ferro branca e controle MPPT para irrigaçáo agrácola em larga escala, fazendas e poços profundos. 380–400V, saáda trifásica.

  • F0199% MPPT Tracking: The product catalog states solar maximum-power-point tracking efficiency up to 99%.
  • F02Automatic Solar Operation: The controller can start or sleep automatically according to available PV power.
  • F03Pump & Drive Protection: Verified functions include PV overvoltage, overcurrent and over-temperature derating.
  • F04Communication & Enclosure Options: GPRS remote monitoring and IP54 cabinet versions are listed as options.
DOC DS-DESCSERIES INVERSOR PARA BOMBAS SOLARESREV 2026-A
IDEEI · Controle de Bombeamento Solar

Inversor para Bombas Solares IDEEI QB100-PV 45–280kW Carcaça de Ferro Branca MPPT 400V

O QB100-PV converte energia do arranjo solar em saída CA controlada para bombas d’água de 45–280kW. Suas ramificações de modelo verificadas cobrem classe 400V · saída trifásica; a seleção final deve seguir a corrente da bomba, tipo de motor e dados da string PV.

45-280kWCarcaça metálica branca, 380-400VControle MPPTBombeamento PV direto

Principais características e benefícios

Rastreamento MPPT 99%

O catálogo do produto indica eficiência de rastreamento do ponto de máxima potência solar de até 99%.

Operação solar automática

O controlador pode ligar ou entrar em repouso automaticamente conforme a energia PV disponível.

Proteção da bomba e do inversor

As funções verificadas incluem sobretensão PV, sobrecorrente e derating por sobretemperatura.

Opções de comunicação e invólucro

Monitoramento remoto GPRS e versões com gabinete IP54 são listadas como opções.

Seleção do modelo

A tabela abaixo mantém visível cada ramificação de potência ou modelo verificada. Selecione o inversor pela corrente nominal da bomba, tensão, fase e condições de aplicação — não apenas pelos kW.

Modelo do pedido Potência da bomba Classe de saída Grupo de invólucro
QB100-045G-4-PV 45kW Classe 400V, trifásico Carcaça metálica branca
QB100-055G-4-PV 55kW Classe 400V, trifásico Carcaça metálica branca
QB100-075G-4-PV 75kW Classe 400V, trifásico Carcaça metálica branca
QB100-090G-4-PV 90kW Classe 400V, trifásico Carcaça metálica branca
QB100-110G-4-PV 110kW Classe 400V, trifásico Carcaça metálica branca
QB100-132G-4-PV 132kW Classe 400V, trifásico Carcaça metálica branca
QB100-160G-4-PV 160kW Classe 400V, trifásico Carcaça metálica branca
QB100-185G-4-PV 185kW Classe 400V, trifásico Carcaça metálica branca
QB100-200G-4-PV 200kW Classe 400V, trifásico Carcaça metálica branca
QB100-PV-250KW 250kW Classe 400V, trifásico Carcaça metálica branca
QB100-PV-280KW 280kW Classe 400V, trifásico Carcaça metálica branca
Nota de seleção: Selecione pela corrente nominal da bomba além dos kW. O catálogo separa as unidades com carcaça metálica branca de 45–280kW das unidades com carcaça de plástico de 0,4–37kW..

Especificações técnicas

Item Especificação verificada
PV input CC 250–900V
Backup CA Classe 380–400V; dependente da configuração
Saída Classe 400V, trifásico
Eficiência MPPT Até 99%
Grupo de invólucro Carcaça metálica branca
Opções / configuração do projeto: Backup CA is supported by configuration; simultaneous AC and DC access requires customization. GPRS, IP54 cabinet and synchronous-pump control are optional or project-dependent.

Aplicações típicas

Agricultural irrigation
Borehole and deep-well pumps
Livestock water supply
Reservoir and tank filling
Rural water supply
Pond and forestry irrigation

Information Required for Seleção do modelo

  • Pump rated power, voltage, phase and full-load current
  • Pump type and motor type (induction, PMSM or single-phase)
  • Required head, flow and daily operating time
  • PV module Voc, Vmp, power and planned series/parallel layout
  • Grid or generator backup requirement
  • Cable length, site altitude, ambient temperature and enclosure requirement

For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.

Installation & Derating Notes

Installation and commissioning must be completed by qualified electrical personnel. Verify polarity, grounding, protective devices, PV open-circuit voltage and motor wiring before energizing. Apply the manual derating and reactor guidance for temperature, altitude and long cable runs.

Perguntas frequentes

Can the inverter run a pump directly from solar panels?

Yes. The QB100-PV is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected Classe 400V · saída trifásica model.

Can grid power or a generator be used as backup?

Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.

How should the inverter power be selected?

Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.

Does the system need batteries?

The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.

Is remote monitoring standard?

Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.

Seleção de engenharia e pedidos em volume

Envie a placa de identificação. Nós dimensionamos o inversor.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

Envie um e-mail
WhatsApp

Email: [email protected] · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Related Models

( REL ) — INVERSOR PARA BOMBAS SOLARES