00 — INVERSOR PARA BOMBAS SOLARES

Inversor para Bombas Solares IDEEI SY200PV 4-15kW 220V para 380V MPPT

4kW5.5kW7.5kW11kW15kW004G-45R5G-47R5G-4011G-4015G-4220V Input380V OutputMPPTAC/DC Hybrid

In Stock Price on Request MOQ 1 UNIT

Inversor para bombas solares IDEEI SY200PV 4-15kW converte 220V monofásico em 380V trifásico com controle MPPT para bombas assíncronas.

Get a Quote→ 24h Reply WhatsApp→ Chat Now

F01220V to 380V Boost: Single-phase 200-240V AC input and three-phase 380V output
F024-15kW Range: Five verified models for asynchronous three-phase water pumps
F03High-Voltage Solar Input: 800V DC maximum and 300-750V recommended operating range
F0499% MPPT: Advanced tracking software maximizes available photovoltaic power
F05AC/DC Hybrid Operation: Supports solar PV and single-phase grid input according to the approved wiring

DOC DS-DESCSERIES INVERSOR PARA BOMBAS SOLARESREV 2026-A

IDEEI · Controle de Bombeamento Solar

Inversor para Bombas Solares IDEEI SY200PV 4-15kW

O inversor para bombas solares SY200PV converte CA monofásica 220V ou CC fotovoltaica de alta tensão adequada em saída trifásica 380V para bombas d’água assíncronas. Cinco modelos de potência verificados combinam controle MPPT, capacidade de fonte híbrida, entradas de sensor e proteção orientada a bombas para fornecimento confiável de água.

4-15kW
Entrada 1F 220V
Saída 3F 380V
MPPT 99%

Por que escolher o Inversor para Bombas Solares SY200PV?

Saída elevadora 220V para 380V

A plataforma -4 verificada aceita CA monofásica 200-240V e fornece 380V trifásico para um motor de bomba assíncrono compatível. Isso é útil onde apenas energia monofásica está disponível, mas a bomba d’água instalada requer energia trifásica.

Controle MPPT avançado

MPPT software is stated at up to 99% efficiency. The controller adjusts pump frequency to the available solar power so a correctly designed PV array can deliver useful water across changing irradiance conditions.

Solar and AC Hybrid Input

The published wiring supports PV DC and single-phase AC input. Source switching and the required protection diode must follow the approved wiring diagram; the two source switches must not be operated together where the diagram prohibits it.

Pump Protection and Sensors

Dry-run, overvoltage, undervoltage, overload, surge, temperature and phase-loss protection are listed. Water-level and radiation sensor inputs support automatic pumping logic when correctly commissioned.

Seleção verificada do modelo

All five models use the published single-phase 220V input and three-phase 380V output architecture. Select the inverter by the pump nameplate current and duty, not by motor power alone.

Model	Rated power	Horsepower	Rated input current	Rated output current
004G-4	4kW	5.5HP	30A	9.5A
5R5G-4	5.5kW	7.5HP	45A	14A
7R5G-4	7.5kW	10HP	56A	17A
011G-4	11kW	15HP	85A	25A
015G-4	15kW	20HP	110A	32A

Nota de seleção: Match the inverter output current to the pump nameplate and confirm motor type. The supplied SY200 sheet identifies asynchronous motors; PMSM or single-phase pump operation is not established for this series.

Especificações técnicas

Item	Especificação verificada
AC input	Single-phase 200V (-10%) to 240V (+10%)
PV input	800V DC maximum; 300V start; 250V lowest working voltage
Recommended PV range	300-750V DC; recommended MPP voltage 550V DC
Rated output	Three-phase 380V AC
Output frequency	0-400Hz
MPPT efficiency	Up to 99% stated
Installation and cooling	Wall mounting; fan cooling; IP20
Environment	-10°C to +50°C; below 1000m without altitude derating guidance stated on the sheet

Opções / configuração do projeto: 4G, Wi-Fi and GPRS remote monitoring require the corresponding communication module and network service. Sensor type, source-switching hardware, lightning protection, enclosure and external isolators must be confirmed for the selected site.

Aplicações típicas

Agricultural irrigation

Desert and remote water supply

Household and village water supply

Livestock watering

Reservoir transfer systems

Sites with single-phase grid backup

Information Required for Model Selection

Pump nameplate power, rated voltage, phase, current and motor type
Required head, flow, daily water volume and operating hours
PV module Voc, Vmp, Imp, wattage and proposed string configuration
Lowest expected site temperature for PV open-circuit voltage checking
Grid or generator backup voltage and required source priority
Cable length, ambient temperature, altitude, enclosure, quantity and destination

Send the complete pump and PV data rather than selecting from the headline kW alone. Motor current, PV voltage at temperature, cable voltage drop, pump duty and source-switching arrangement determine the final inverter, protective devices and commissioning parameters.

Installation and Derating Notes

The IP20 enclosure is intended for installation inside a clean, dry and ventilated electrical area or suitable protective cabinet. The sheet states operation from -10°C to +50°C and requires 1% derating for every 1°C above 40°C. The installation altitude is stated as below 1000m; confirm additional derating for higher sites.

Qualified personnel must verify grounding, AC and DC isolation, polarity, pump wiring and lightning protection before energizing. Keep the cold-weather PV open-circuit voltage below the 800V DC maximum. Follow the published source-switching and protection-diode diagram: incorrect simultaneous switching can damage the photovoltaic array.

Perguntas frequentes

Can SY200PV convert 220V single-phase power to a 380V three-phase pump?

Yes. The verified -4 model branch accepts single-phase 200-240V AC and provides three-phase 380V output. The pump must be an appropriate three-phase asynchronous motor within the selected model current.

What photovoltaic voltage should be used?

The recommended DC input range is 300-750V, the stated start voltage is 300V and the recommended MPP voltage is 550V. The array must remain below 800V open circuit under the coldest expected condition.

Can solar and grid power both be connected?

The product sheet shows PV and grid inputs for hybrid operation. Source switches and the protection diode must follow the approved diagram. Do not improvise parallel source connections or operate prohibited switches simultaneously.

Does it include dry-run and tank-level control?

Dry-run protection is listed, and the wiring diagram provides high- and low-water-level switch inputs. Confirm the sensor type, logic and commissioning settings for the actual well and storage tank.

Is remote monitoring included as standard?

The series supports 4G, Wi-Fi or GPRS modules for mobile-phone and browser monitoring. The module, antenna, network compatibility and platform access are project-dependent and must be confirmed before ordering.

Engineering selection and bulk orders

Envie a placa de identificação. Nós dimensionamos o inversor.

Send the pump nameplate, PV module data, required head and flow, cable length, AC backup requirement, quantity and destination. Our engineering team will confirm the suitable SY200PV model and project configuration.

Solicitar orçamento
WhatsApp
Envie um e-mail

Email: [email protected] · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)

Get a Quote→ Email Us WhatsApp+86 183 5724 1165