سلسلة IDEEI QB-Hi هي عاكس خارج الشبكة بتقنية MPPT عالي الجهد لأحمال 220-240V. ثلاثة طرازات: 5kW و7kW و11kW.
ترقية متاحة: QB-Hi 2 هو النسخة المُحسَّنة من هذا الطراز، بتصميم IGBT كامل القدرة (4-11kW). راجع صفحة منتج QB-Hi 2 لمزيد من التفاصيل。
سلسلة QB-Hi هي عاكس خارج الشبكة بتقنية MPPT عالي الجهد لأحمال التيار المتردد 220-240V. تغطي ثلاثة طرازات منشورة 5kW و7kW و11kW. يجب تأكيد ترتيب البطارية ووضع أولوية المصدر للمشروع المحدد.
Wide photovoltaic tracking range supports daytime off-grid power from a suitable PV string.
The published 220-240V AC output supports compatible household and commercial loads.
تدعم العلبة المعدنية والتبريد القسري وقدرة الحمل الزائد الأحمال الحثية ذات الحجم المناسب.
The product sheet lists DC reverse, AC short-circuit, lightning, leakage, overload and temperature protection.
The table separates verified published data from project-dependent choices. Match the product by electrical ratings and application conditions; do not select from the headline power value alone.
| Model | Rated power | تيار الإخراج المقنن | الحد الأقصى لتيار إدخال الطاقة الكهروضوئية | جهد الإخراج |
|---|---|---|---|---|
| Hi-5KW | 5kW | 25A | 59.5A | تيار متردد 220/240V |
| Hi-7KW | 7kW | 33A | 78.5A | تيار متردد 220/240V |
| Hi-11KW | 11kW | 49A | 116.5A | تيار متردد 220/240V |
| Item | Verified specification |
|---|---|
| Maximum / rated DC input | 400V / 330V DC |
| MPPT working range | 160-390V DC |
| Maximum efficiency | 99% |
| مستوى الحماية | IP21 |
| Overload | 1.2 times sustained overload stated |
| Output | 220-240V AC sine wave |
A dependable quotation requires the complete operating profile, not only the nominal power. IDEEI reviews voltage, current, source or motor data, duty, environment, required options and destination together so the final configuration, accessories, protection devices and commercial scope can be stated clearly.
Separate continuous load from startup surge loads such as pumps, compressors and motors. Check the PV string at the lowest expected temperature so open-circuit voltage remains below the product limit. Where a battery is used, match chemistry, nominal voltage, charge current and communication protocol. Source priority, transfer behavior, neutral arrangement and generator compatibility must be confirmed for the complete system.
Installation and commissioning must be completed by qualified electrical personnel. Isolate all energy sources before wiring, verify terminal functions against the current manual, provide protective devices and grounding, and apply the published derating guidance for altitude, temperature, enclosure and cable length. Product-page data supports preliminary selection and does not replace project engineering or local code compliance.
يُدعم التشغيل بدون بطارية فقط حيث يُذكر ذلك لسلسلة QB-Hi وحيث يمكن لمصدر الطاقة الكهروضوئية أو المرافق المتاح دعم الحمل المتصل. تأكد من وضع التشغيل المقصود قبل التوصيل.
Use the selected model’s permitted PV voltage window and maximum open-circuit voltage. Check cold-weather Voc, operating Vmp, current, total array power and local irradiance rather than selecting from inverter kW alone.
Supported AC input and source-priority modes depend on the selected series. The transfer arrangement, protection devices and neutral/earthing scheme must be confirmed for the installation.
Communication is model- and project-dependent. Confirm Wi-Fi, GPRS, RS232, RS485 and the required lithium-battery protocol before ordering.
Send the load list, surge loads, required output voltage and phase, PV module data, battery information, backup-source data, operating schedule, quantity and delivery country.
Send the required electrical and application data, quantity and destination. Our team will confirm the suitable model, options and quotation scope.
Email: [email protected] · واتساب: +86 183 5724 1165
هل لديك سؤال حول اختيار الموديل أو سعر الكمية أو الشحن؟ تواصل معنا مباشرة.
ابدأ محادثة واتساب ←Questions about model selection, bulk pricing or shipping? Chat with us directly.
Start WhatsApp Chat →
