FÁBRICA ONLINE — HAIYAN, ZHEJIANG
SEG–SÁB 8:30–17:30 (GMT+8) [email protected] WA +86 183 5724 1165
ENESARPT-BR
Solicitar cotação→ Contato
Home/Products/Inversor para bombas solares/VFD para Bombeamento Solar IDEEI IP65 0,4–37kW MPPT para Uso Externo
VFD para Bombeamento Solar IDEEI IP65 0,4–37kW MPPT para Uso Externo
00 — INVERSOR PARA BOMBAS SOLARES

VFD para Bombeamento Solar IDEEI IP65 0,4–37kW MPPT para Uso Externo

0.4kW0.75kW1.5kW2.2kW4kW5.5kW7.5kW11kW15kW18.5kW22kW30kW37kWIP65SS2S224
In Stock Price on Request MOQ 1 UNIT

Inversor para bombas solares IDEEI IP65 com controle MPPT para bombeamento fotovoltaico.

Get a Quote→ 24h Reply WhatsApp→ Chat Now
  • F01MPPT Solar Tracking: The controller adjusts pump speed as available PV power changes, supporting direct solar water pumping.
  • F02Pump-Oriented Control: Automatic operating logic and pump protection functions support unattended water-supply applications.
  • F03AC/DC Project Flexibility: PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.
  • F04Engineering Selection: Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.
DOC DS-DESCSERIES INVERSOR PARA BOMBAS SOLARESREV 2026-A
IDEEI · Controle de Bombeamento Solar

VFD para Bombeamento Solar IDEEI IP65 0,4–37kW MPPT para Uso Externo

A série IP65 converte energia do arranjo solar em saída CA controlada para bombas d’água de 0,4–37kW. Suas ramificações de modelo verificadas cobrem classes 220V e 380V; a seleção final deve seguir a corrente da bomba, tipo de motor e dados da string PV.

Invólucro IP650.4–37kW220V / 380VMPPT solar control

Principais características e benefícios

MPPT Solar Tracking

The controller adjusts pump speed as available PV power changes, supporting direct solar water pumping.

Pump-Oriented Control

Automatic operating logic and pump protection functions support unattended water-supply applications.

AC/DC Project Flexibility

PV input is the primary source; supported AC backup arrangements depend on the selected model and wiring.

Engineering Selection

Current, voltage, phase, motor type, PV string and cable length are checked together before ordering.

Model Selection

The table below keeps every verified power or model branch visible. Match the inverter by pump rated current, voltage, phase and application conditions—not by kW alone.

Branch Power Output Rated input current Rated output current
SS2 0.4kW 1-phase 220V 6.5A 4.2A
SS2 0.75kW 1-phase 220V 9.3A 7.2A
SS2 1.5kW 1-phase 220V 15.7A 10.2A
SS2 2.2kW 1-phase 220V 24A 14A
S2 0.4kW 3-phase 220V 6.5A 2.5A
S2 0.75kW 3-phase 220V 9.3A 4.2A
S2 1.5kW 3-phase 220V 15.7A 7.5A
S2 2.2kW 3-phase 220V 24A 10A
2 4kW 3-phase 220V 17A 16A
2 5.5kW 3-phase 220V 25A 20A
2 7.5kW 3-phase 220V 33A 30A
4 0.75kW 3-phase 380V 3.4A 2.5A
4 1.5kW 3-phase 380V 5A 4.2A
4 2.2kW 3-phase 380V 5.8A 5.5A
4 4kW 3-phase 380V 13.5A 9.5A
4 5.5kW 3-phase 380V 19.5A 14A
4 7.5kW 3-phase 380V 25A 18.5A
4 11kW 3-phase 380V 32A 25A
4 15kW 3-phase 380V 40A 32A
4 18.5kW 3-phase 380V 47A 38A
4 22kW 3-phase 380V 51A 45A
4 30kW 3-phase 380V 70A 60A
4 37kW 3-phase 380V 80A 75A
Nota de seleção: Confirm the pump rated current, voltage, phase and motor type. For submersible pumps or long motor cables, the next suitable current rating and an output reactor may be required.

Especificações técnicas

Item Especificação verificada
Enclosure IP65 series
220V PV range Recommended DC 200–400V; MPP 330V
380V PV range Recommended DC 300–750V; MPP 550V
Max DC voltage 440V for 220V branches; 900V for 380V branch
Water-level inputs High and low water-level terminals documented
Opções / configuração do projeto: Remote communication, enclosure upgrades, AC backup switching, reactors, surge protection and motor-specific settings must be confirmed for the selected model.

Aplicações típicas

Agricultural irrigation
Borehole and deep-well pumps
Livestock water supply
Reservoir and tank filling
Rural water supply
Pond and forestry irrigation

Information Required for Model Selection

  • Pump rated power, voltage, phase and full-load current
  • Pump type and motor type (induction, PMSM or single-phase)
  • Required head, flow and daily operating time
  • PV module Voc, Vmp, power and planned series/parallel layout
  • Grid or generator backup requirement
  • Cable length, site altitude, ambient temperature and enclosure requirement

For a dependable quotation, also confirm the installation altitude, ambient temperature, enclosure requirement, daily operating schedule, water-source conditions and whether utility or generator backup is required. These details affect derating, cable selection, protection devices and the final AC/DC system design.

Installation & Derating Notes

Installation must be completed by qualified electricians. Keep the unit upright, verify PV polarity and voltage, and use the specified protection devices. The manual requires derating above 40°C and above 1000m altitude; confirm site conditions during selection.

Perguntas frequentes

Can the inverter run a pump directly from solar panels?

Yes. The IP65 Series is designed for PV-powered pumping. Confirm the PV string voltage remains inside the verified range for the selected 220V and 380V classes model.

Can grid power or a generator be used as backup?

Backup input depends on the selected branch and wiring configuration. Do not connect sources simultaneously unless the selected model and protection arrangement explicitly support it.

How should the inverter power be selected?

Check the pump nameplate current, rated voltage, phase, motor type, head, flow and cable length. The selected inverter current must meet the motor requirement.

Does the system need batteries?

The standard solar-pumping architecture can operate directly from the PV array. Battery use is not required unless a separate project design specifies it.

Is remote monitoring standard?

Remote communication is optional or model-dependent. Confirm the required GPRS, 4G or Wi-Fi module before ordering.

Seleção de engenharia e pedidos em volume

Envie a placa de identificação. Nós dimensionamos o inversor.

Send the pump nameplate, PV module data, required head and flow, cable length and quantity. Our team will confirm the suitable model and project configuration.

Envie um e-mail
WhatsApp

Email: [email protected] · WhatsApp: +86 183 5724 1165

Talk to an engineerFACTORY-DIRECT · MON–SAT 8:30–17:30 (GMT+8)
Get a Quote→ Email Us WhatsApp+86 183 5724 1165

Related Models

( REL ) — INVERSOR PARA BOMBAS SOLARES
/01 Inversor Solar para Bombeamento QB100-PV Carcaça de Ferro Branca 45-280kW 45kW · 55kW · 75kW In StockRFQ
/02 Inversor Solar para Bombeamento QB100-PV Carcaça de Plástico Branca 0,4-37kW 0.4kW · 0.75kW · 1.5kW In StockRFQ
/03 IDEEI S81 hybrid solar pump inverter technical specifications and features IDEEI S81 Inversor de Frequência Híbrido Solar para Bombas 0,75–200kW AC/DC 75–200 kW · S81 D3 · S81 D5 In StockRFQ
/04 IDEEI S80 solar pump inverter product view IDEEI S80 Inversor de Frequência Solar para Bombas 0,75–200kW MPPT VFD 75–200 kW · S80 D3 · S80 D5 In StockRFQ